Product TextsGENERAL PURPOSE CLEAR PVC COMPOUND WITH LOW LEVEL OF U.V. INHIBITOR.
加工/物理特性
值(Value)
单位(Unit)
测试标准(Test Standard)
ASTM数据(ASTM Data)
模具收缩(Mold Shrinkage) (MD)
0.015
mm/mm
ASTM D 955
密度(Density) (73°F)
1240
kg/m³
ASTM D 792
机械性能(机械性能(Mechanical properties))
值(Value)
单位(Unit)
测试标准(Test Standard)
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength) at Break
18.6
MPa
ASTM D 638
断裂伸长率(Elongation at Break)
390
%
ASTM D 638
Shore A Hardness
91
-
ASTM D 2240
撕裂强度(Tear Strength)
86
kN/m
ASTM D 624
Compression Set(22 hr @ 73 °F)
37
%
ASTM D 395
热性能(热性能(Thermal properties))
值(Value)
单位(Unit)
测试标准(Test Standard)
ASTM数据(ASTM Data)
熔化温度(Melting 温度(Temperature))
179
°C
ASTM D 3418
Optical properties
值(Value)
单位(Unit)
测试标准(Test Standard)
ASTM数据(ASTM Data)
Haze
5
%
ASTM D 1003
Light Transmittance
80
%
ASTM D 1003
CharacteristicsProcessingInjection Molding, Other ExtrusionDelivery formPelletsSpecial CharacteristicsTransparentApplicationsGeneral PurposeRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
