Apinat® DP1888|TPE|API物性表报告及物性特性介绍,Apinat® DP1888|TPE|API注塑参数详情-塑料物性表查询网

Apinat® DP1888|TPE|API

Apinat® DP1888|TPE|API 物性表: Apinat® DP1888|TPE|API物性表及特性介绍,Apinat® DP1888|TPE|API注塑参数详情,如需Apinat® DP1888|TPE|API下载, 可到相关下载区下载

Product TextsFor some properties of this material the producer records only ranges and not specific values. The values seen above are always the maximum values, so the typical values can differ from the ones seen above.8	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	889	%	ASTM D 638
Modulus at 100% Elongation	9.3	MPa	ASTM D 412
Modulus at 300% Elongation	13.7	MPa	ASTM D 412
Shore A Hardness	55	-	ASTM D 2240
Shore D Hardness	40	-	ASTM D 2240
撕裂强度(Tear Strength)	114	kN/m	ASTM D 624

CharacteristicsProcessingInjection Molding, Other ExtrusionDelivery formGranulesFeaturesSoft FeelEcological valuationBiodegradable, Compostable ISO 13432 (Producer), Compostable ASTM D6400 (Producer)Regional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base .
[/td][/tr][/table]

关键词:
TPE
API
Apinat® DP1888

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-78010.html

免责声明: 本文 Apinat® DP1888|TPE|API 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络