ALCOM庐 PA66 910/30.2 TCD2|PA66...|ALBIS Plastic物性表报告及物性特性介绍,ALCOM庐 PA66 910/30.2 TCD2|PA66...|ALBIS Plastic注塑参数详情-塑料物性表查询网

ALCOM庐 PA66 910/30.2 TCD2|PA66...|ALBIS Plastic

ALCOM庐 PA66 910/30.2 TCD2|PA66...|ALBIS Plastic 物性表: ALCOM庐 PA66 910/30.2 TCD2|PA66...|ALBIS Plastic物性表及特性介绍,ALCOM庐 PA66 910/30.2 TCD2|PA66...|ALBIS Plastic注塑参数详情,如需ALCOM庐 PA66 910/30.2 TCD2|PA66...|ALBIS Plastic下载, 可到相关下载区下载

2 TCD2 | PA66... |ALBIS Plastic

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鎷変几妯￠噺(Tensile Modulus)	7000	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Stress at break)	40	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Strain at break)	1.5	%	ISO 527-1/-2
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (+23掳C)	8	kJ/m虏	ISO 179/1eU
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (+23掳C)	3	kJ/m虏	ISO 179/1eA

鐑€ц兘(鐑€ц兘(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (1.80 MPa)	131	掳C	ISO 75-1/-2
Vicat softening temperature (50掳C/h 50N)	200	掳C	ISO 306
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at thickness h	HB	class	IEC 60695-11-10
鍘氬害娴嬭瘯(Thickness tested)	3.2	mm	IEC 60695-11-10

鐢垫皵鎬ц兘(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
琛ㄩ潰鐢甸樆鐜?Surface resistivity)	1E12	Ohm	IEC 60093

鍏朵粬灞炴€?Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
瀵嗗害(Density)	2540	kg/m鲁	ISO 1183

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsIncreased electrical conductivity, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base .

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-79827.html

免责声明: 本文 ALCOM庐 PA66 910/30.2 TCD2|PA66...|ALBIS Plastic 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络