Durethan® A 30 H3.0|PA66|LANXESS物性表报告及物性特性介绍,Durethan® A 30 H3.0|PA66|LANXESS注塑参数详情-塑料物性表查询网

0 | PA66 |LANXESS Product TextsPA 66, non-reinforced, injection moulding, heat-ageing stabilized

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
成型收缩(Molding shrinkage) (parallel)	0.8 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.9 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	3500 / 1300	MPa	ISO 527-1/-2
屈服应力(Yield stress)	95 / 55	MPa	ISO 527-1/-2
屈服应变(Yield strain)	4.5 / 20	%	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	- / >50	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	160 / 190	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	100 / 100	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	10 / 20	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	10 / 10	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	261 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	70 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	200 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	60 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	100 / *	E-6/K	ISO 11359-1/-2

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3.8 / 13	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3.4 / 4.1	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	120 / 3200	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	570 / 1000	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13 / 1E10	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E13	Ohm	IEC 60093
电气强度(Electric strength)	31 / 25	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	600 / -	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	8.5 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	2.8 / *	%	Sim. to ISO 62
密度(Density)	1140 / -	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	970	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.225	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	2900	J/(kg K)	-
Eff. thermal diffusivity	8E-8	m²/s	-
喷射温度(Ejection temperature)	185	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	280	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724

CharacteristicsProcessingInjection MoldingDelivery formPelletsSpecial CharacteristicsHeat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING Water content: 0.1 % .