Akulon® M-1016|PA66-GF33|DSM物性表报告及物性特性介绍,Akulon® M-1016|PA66-GF33|DSM注塑参数详情-塑料物性表查询网

Product Texts33% Glass Reinforced, Heat Stabilized4 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.9 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	9500 / 7500	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	175 / 120	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	3 / 5	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	80 / 100	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	70 / 70	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	12 / 20	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	10 / 10	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	260 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	246 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	260 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	20 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	70 / *	E-6/K	ISO 11359-1/-2

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3.8 / 10	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3.5 / 4.1	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	90 / 2800	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	160 / 800	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E12 / 1E10	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E13	Ohm	IEC 60093
电气强度(Electric strength)	30 / 25	kV/mm	IEC 60243-1

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	8 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	2.1 / *	%	Sim. to ISO 62
密度(Density)	1380 / *	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesLubricants, Release agentSpecial CharacteristicsHeat stabilized or stable to heatRegional AvailabilityNorth AmericaOther text informationInjection moldingInjection Molding RecommendationsDisclaimerCopyright M-Base .
[/td][/tr][/table]