ALCOM® PA66 910/1.3 CF/GF30|PA66-(CF+GF)|ALBIS Plastic物性表报告及物性特性介绍,ALCOM® PA66 910/1.3 CF/GF30|PA66-(CF+GF)|ALBIS Plastic注塑参数详情-塑料物性表查询网

ALCOM® PA66 910/1.3 CF/GF30|PA66-(CF+GF)|ALBIS Plastic

3 CF/GF30 | PA66-(CF+GF) |ALBIS Plastic

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	10000	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	150	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	2.7	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	40	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	5.5	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	260	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	245	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	200	°C	ISO 306
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6	mm	IEC 60695-11-10
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8	mm	IEC 60695-11-10

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
表面电阻率(Surface resistivity)	1000	Ohm	IEC 60093

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density)	1340	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsIncreased electrical conductivity, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base .

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-80447.html

免责声明: 本文 ALCOM® PA66 910/1.3 CF/GF30|PA66-(CF+GF)|ALBIS Plastic 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络