Durethan® AKV 25 F30|PA66-GF25 FR|LANXESS物性表报告及物性特性介绍,Durethan® AKV 25 F30|PA66-GF25 FR|LANXESS注塑参数详情-塑料物性表查询网

Product TextsPA 66, 25 % glass fibres, injection moulding, flame retardant

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
成型收缩(Molding shrinkage) (parallel)	0.4 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.7 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	10500 / -	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	150 / -	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	2.2 / -	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	50 / -	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	40 / -	kJ/m²	ISO 179/1eU

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	260 / *	°C	ISO 11357-1/-3
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	30 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	80 / *	E-6/K	ISO 11359-1/-2

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相比漏电起痕指数(Comparative tracking index)	350 / -	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density)	1600 / -	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1050	kg/m³	-
规格的热容融化(Spec. heat capacity of melt)	2590	J/(kg K)	-
喷射温度(Ejection temperature)	185	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	290	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724

CharacteristicsProcessingInjection MoldingDelivery formPelletsSpecial CharacteristicsFlame retardantRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING Water content: 0.1 % .