Lubriloy RF206|PA66-GF|SABIC_IP物性表报告及物性特性介绍,Lubriloy RF206|PA66-GF|SABIC

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
成型收缩(Molding shrinkage) (parallel)	0.4	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.2	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	8200	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	121	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	2.7	%	ISO 527-1/-2
弯曲弹性模量(Flexural modulus) (23°C)	8500	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	12	kJ/m²	ISO 180/1A
悬臂梁式冲击无切口(Izod Impact unnotched) (23°C)	48	kJ/m²	ISO 180/1U
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	8890.02	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	122	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	2.6	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	6820	MPa	ASTM D 790
抗弯强度(Flexural Strength)	178	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.117	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	238	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	36.9	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	69.1	E-6/K	ISO 11359-1/-2
ASTM数据(ASTM Data)
热膨胀系数(Coefficient of Thermal Expansion) (MD)	36.7	E-6/K	ASTM D 696
热膨胀系数(Coefficient of Thermal Expansion) (TD)	69.1	E-6/K	ASTM D 696
DTUL @ 66 psi	258	°C	ASTM D 648
DTUL @ 264 psi	241	°C	ASTM D 648

CharacteristicsProcessingInjection MoldingAdditivesLubricantsRegional AvailabilityEurope, Near East/AfricaDisclaimerCopyright M-Base .