Staramide AG6ST43|PA66-GF30|SABIC_IP物性表报告及物性特性介绍,Staramide AG6ST43|PA66-GF30|SABIC

Staramide AG6ST43|PA66-GF30|SABIC_IP

娴佸彉鎬ц兘(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
鎴愬瀷鏀剁缉(Molding shrinkage) (parallel)	0.4	%	ISO 294-4, 2577

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
鎷変几妯￠噺(Tensile Modulus)	5800	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Stress at break)	110	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Strain at break)	5	%	ISO 527-1/-2
鎮噦姊佸紡鍐插嚮鍒囧彛 (23掳C)	22	kJ/m虏	ISO 180/1A
鎮噦姊佸紡鍐插嚮鍒囧彛	16	kJ/m虏	ISO 180/1A
娓╁害(Temperature)	-40	掳C	ISO 180/1A

鐑€ц兘(鐑€ц兘(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (1.80 MPa)	225	掳C	ISO 75-1/-2
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (0.45 MPa)	245	掳C	ISO 75-1/-2
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (parallel)	400	E-6/K	ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
鍘氬害娴嬭瘯(Thickness tested)	1.6	mm	IEC 60695-11-10

CharacteristicsProcessingInjection MoldingRegional AvailabilityEurope, Near East/AfricaDisclaimerCopyright M-Base .

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-82040.html

免责声明: 本文 Staramide AG6ST43|PA66-GF30|SABIC_IP 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络