Technyl® A 218 V30 Black 21 NHFE|PA66-GF30|Rhodia物性表报告及物性特性介绍,Technyl® A 218 V30 Black 21 NHFE|PA66-GF30|Rhodia注塑参数详情-塑料物性表查询网

Product TextsPolyamide 66, high flow, reinforced with 30% of glass fibre, heat stabilized, for injection molding. Enhanced molding behaviors and better surface finish. This grade is ideal for use in the automotive industry for engine components, such as: 2	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	75 / 85	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	10 / 14	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	263 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	250 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	258 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	25 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6 / *	mm	IEC 60695-11-10

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.8 / *	%	Sim. to ISO 62
密度(Density)	1370 / -	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsHeat stabilized or stable to heatRegional AvailabilityEuropeOther text informationInjection moldingThe material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content of less than 0,2% with a dehumidified air drying equipment at approx 80°C.ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] .
[/td][/tr][/table]