Technyl® A 402 Natural FA|PA66|Rhodia物性表报告及物性特性介绍,Technyl® A 402 Natural FA|PA66|Rhodia注塑参数详情-塑料物性表查询网

Product TextsUnreinforced polyamide PA66, very high viscosity, for extrusion.of deflection under load (1.80 MPa)	75 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	70 / *	E-6/K	ISO 11359-1/-2
Oxygen index	27 / *	%	ISO 4589-1/-2

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
耗散因数(耗散因数(Dissipation factor)) (1MHz)	200 / 1000	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E12	Ohm	IEC 60093
电气强度(Electric strength)	27 / 26	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	600 / 600	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.5 / *	%	Sim. to ISO 62
密度(Density)	1140 / -	kg/m³	ISO 1183

材料特殊性能(Material specific properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	438 / *	cm³/g	ISO 307, 1157, 1628

CharacteristicsProcessingProfile Extrusion, Other ExtrusionRegional AvailabilityEuropeOther text informationInjection moldingThe material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content of less than 0,1% with a dehumidified air drying equipment at approx 80°C.In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content of less than 0,1% with a dehumidified air drying equipment at approx 80°C. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content of less than 0,1% with a dehumidified air drying equipment at approx 80°C. .
[/td][/tr][/table]