Ultramid® A3EG3|PA66-GF15|BASF物性表报告及物性特性介绍,Ultramid® A3EG3|PA66-GF15|BASF注塑参数详情-塑料物性表查询网

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
模具收缩(Mold Shrinkage) (MD)	0.0055	mm/mm	ASTM D 955
密度(Density) (73°F)	1240	kg/m³	ASTM D 792
吸水率(Water Absorption) (Equilibrium)	7	%	ASTM D 570

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	70 / *	cm³/10min	ISO 1133
温度(Temperature)	275 / *	°C	ISO 1133
负载(Load)	5 / *	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	6000 / 4500	MPa	ISO 527-1/-2
屈服应力(Yield stress)	130 / 85	MPa	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	3 / 10	%	ISO 527-1/-2
Tensile creep modulus (1000h)	* / 2500	MPa	ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)	45 / 70	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	43 / -	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	8 / 11	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	7 / -	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	5500 / 4000	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	5.5 / 6.5	kJ/m²	ISO 180/1A
球压痕硬度(Ball indentation hardness)	200 / 150	MPa	ISO 2039-1
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength) at Break	114	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	3	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	5170	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.059	kJ/m	ASTM D 256
悬臂梁式冲击切口 (Low-温度(Temperature))	0.053	kJ/m	ASTM D 256
温度(Temperature)	-40	°C	ASTM D 256

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
熔化温度(熔化温度(Melting temperature)) (10°C/min)	260 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	250 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	250 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	32 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	75 / *	E-6/K	ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	HB	-	UL 94
厚度测试(Thickness tested)	1.5	mm	-
DTUL @ 66 psi	250	°C	ASTM D 648
DTUL @ 264 psi	250	°C	ASTM D 648
熔化温度(Melting 温度(Temperature))	260	°C	ASTM D 3418

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
相对介电常数(Relative permittivity) (1MHz)	3.5 / 5.5	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	140 / 1600	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E10	Ohm	IEC 60093
相比漏电起痕指数(Comparative tracking index)	550 / -	-	IEC 60112
ASTM数据(ASTM Data)
体积电阻率(Volume Resistivity)	1E13	Ohm*cm	ASTM D 257

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
吸水率(Water absorption)	7 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	2.2 / *	%	Sim. to ISO 62
密度(Density)	1230 / -	kg/m³	ISO 1183

材料特殊性能(Material specific properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
粘数(Viscosity number)	145 / *	cm³/g	ISO 307, 1157, 1628

CharacteristicsProcessingInjection Molding, Other ExtrusionDelivery formPellets, Natural ColorApplicationsAutomotive, Electrical and ElectronicalRegional AvailabilityNorth America, .