Vydyne® R220|PA66-MX40|Ascend物性表报告及物性特性介绍,Vydyne® R220|PA66-MX40|Ascend注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
成型收缩(Molding shrinkage) (parallel)	1.0 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.1 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	6900 / 2600	MPa	ISO 527-1/-2
屈服应力(Yield stress)	103 / 73	MPa	ISO 527-1/-2
屈服应变(Yield strain)	1.5 / 16	%	ISO 527-1/-2
破坏时应变(Strain at break)	6 / 30	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	143 / -	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	109 / -	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	7.4 / -	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	6.2 / -	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	6100 / 2300	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	9 / -	kJ/m²	ISO 180/1A

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
熔化温度(熔化温度(Melting temperature)) (10°C/min)	258 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	118 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	222 / *	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	238 / *	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	6 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	6.3 / *	E-6/K	ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.5 / *	mm	IEC 60695-11-10
UL 识别(recognition)	UL / *	-	-
燃烧性厚度(Burning behav. at thickness h)	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8 / *	mm	IEC 60695-11-10
UL 识别(recognition)	UL / *	-	-

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
体积电阻率(Volume resistivity)	>1E13 / -	Ohm*m	IEC 60093
相比漏电起痕指数(Comparative tracking index)	600 / -	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
吸水率(Water absorption)	1.6 / *	%	Sim. to ISO 62
密度(Density)	1480 / -	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formPelletsSpecial CharacteristicsHigh impact or impact modified, Heat stabilized or stable to heatFeaturesDuctile, Low Odor, Melt StrengthChemical ResistanceGeneral Chemical Resistance, Solvent Resistance, Oil ResistanceApplicationsAutomotiveRegional AvailabilityNorth America, Europe, .