Zytel® 70G33HS1L NC010|PA66-GF33|DuPont物性表报告及物性特性介绍,Zytel® 70G33HS1L NC010|PA66-GF33|DuPont注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
成型收缩(Molding shrinkage) (parallel)	0.3 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.1 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	11000 / 8000	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	200 / 140	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	3.5 / 5	%	ISO 527-1/-2
Tensile creep modulus (1h)	* / 8000	MPa	ISO 899-1
Tensile creep modulus (1000h)	* / 5500	MPa	ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)	90 / 100	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	70 / 80	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	12 / 17	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	10 / 10	kJ/m²	ISO 179/1eA
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength)	186	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	3	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	8965.03	MPa	ASTM D 790
抗弯强度(Flexural Strength)	262	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	M 101	-	ASTM D 785
悬臂梁式冲击切口 (1/8 in)	0.117	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	263 / *	°C	ISO 11357-1/-3
玻璃化转变温度(Glass transition temperature) (10°C/min)	80 / *	°C	ISO 11357-1/-2
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	250 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	260 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	18 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	85 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.5 / *	mm	IEC 60695-11-10
UL 识别(recognition)	UL / *	-	-
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8 / *	mm	IEC 60695-11-10
UL 识别(recognition)	UL / *	-	-
Oxygen index	24 / *	%	ISO 4589-1/-2
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	HB	-	UL 94
厚度测试(Thickness tested)	1.5	mm	-
热膨胀系数(Coefficient of Thermal Expansion) (MD)	18	E-6/K	ASTM D 696
热膨胀系数(Coefficient of Thermal Expansion) (TD)	83	E-6/K	ASTM D 696
DTUL @ 66 psi	261	°C	ASTM D 648
DTUL @ 264 psi	249	°C	ASTM D 648
熔化温度(Melting 温度(Temperature))	263	°C	ASTM D 3418

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	4.2 / -	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	4 / -	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	100 / -	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	150 / -	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13 / 1E9	Ohm*m	IEC 60093
ASTM数据(ASTM Data)
绝缘强度(Dielectric Strength) (Short Time)	20.9	kV/mm	ASTM D 149
耗散因数(Dissipation Factor) (1 MHz)	0.02	-	ASTM D 150
介电常数(Dielectric Constant) (1 MHz)	3.7	-	ASTM D 150
体积电阻率(Volume Resistivity)	1E15	Ohm*cm	ASTM D 257

材料特殊性能(Material specific properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	130 / *	cm³/g	ISO 307, 1157, 1628

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体热导率(Thermal conductivity of melt)	0.22	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	2210	J/(kg K)	-

DiagramsEng.Oil, ISP (140°C)

ISO 1817 Liquid C) (23°C)

ISO 1817 Liquid 4) (23°C)

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (90°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)