Zytel® FR70M30V0 NC010|PA66-MD30 FR(17)|DuPont物性表报告及物性特性介绍,Zytel® FR70M30V0 NC010|PA66-MD30 FR(17)|DuPont注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
成型收缩(Molding shrinkage) (parallel)	1.0 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.0 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	8500 / 4500	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	75 / 54	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	2 / 6	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	21 / 24	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	21 / 19	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	2.5 / 3	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	2 / 2	kJ/m²	ISO 179/1eA
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength)	73	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	2	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	6550	MPa	ASTM D 790
抗弯强度(Flexural Strength)	115	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.027	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	263 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	140 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	240 / *	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	235 / *	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	65 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	80 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-0 / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.5 / *	mm	IEC 60695-11-10
UL 识别(recognition)	UL / *	-	-
燃烧性(球压痕硬度(Burning behav)). at thickness h	V-0 / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.0 / *	mm	IEC 60695-11-10
UL 识别(recognition)	UL / *	-	-
燃烧性(球压痕硬度(Burning behav)). 5V at thickness h	5VA / *	class	IEC 60695-11-20
厚度测试(Thickness tested)	1.5 / *	mm	IEC 60695-11-20
UL 识别(recognition)	UL / *	-	-
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	V-0	-	UL 94
厚度测试(Thickness tested)	1.5	mm	-
DTUL @ 264 psi	154	°C	ASTM D 648
熔化温度(Melting 温度(Temperature))	260	°C	ASTM D 3418
极限氧指数(Limiting 氧指数(Oxygen Index))	38	%	ASTM D 2863

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	4.1 / 9.1	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3.7 / 4.2	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	140 / 4100	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	140 / 500	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13 / 1E9	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / >1E15	Ohm	IEC 60093
电气强度(Electric strength)	40 / 33	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	325 / -	-	IEC 60112
ASTM数据(ASTM Data)
绝缘强度(Dielectric Strength) (Short Time)	16	kV/mm	ASTM D 149
耗散因数(Dissipation Factor) (1 MHz)	0.014	-	ASTM D 150
介电常数(Dielectric Constant) (1 MHz)	3.7	-	ASTM D 150
表面电阻率(Surface Resistivity)	1E15	Ohm	ASTM D 257
体积电阻率(Volume Resistivity)	1E14	Ohm*cm	ASTM D 257

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1400	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.23	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	1700	J/(kg K)	-
喷射温度(Ejection temperature)	190	°C	-

Diagrams ISO 1817 Liquid C) (23°C)

ISO 1817 Liquid 4) (23°C)

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (90°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)