Zytel® FG408L NC010|PA66-I|DuPont物性表报告及物性特性介绍,Zytel® FG408L NC010|PA66-I|DuPont注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
成型收缩(Molding shrinkage) (parallel)	1.2 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.9 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2200 / 1100	MPa	ISO 527-1/-2
屈服应力(Yield stress)	63 / 43	MPa	ISO 527-1/-2
屈服应变(Yield strain)	6 / 26	%	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	35 / >50	%	ISO 527-1/-2
Tensile creep modulus (1h)	* / 950	MPa	ISO 899-1
Tensile creep modulus (1000h)	* / 840	MPa	ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)	N / N	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	N / N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	18 / 25	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	15 / 6	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	263 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	66 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	150 / *	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	210 / *	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	130 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	130 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.5 / *	mm	IEC 60695-11-10
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8 / *	mm	IEC 60695-11-10
Oxygen index	19 / *	%	ISO 4589-1/-2

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3.2 / 7	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	2.9 / 3.7	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	200 / 1500	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	200 / 500	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13 / 1E11	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E15	Ohm	IEC 60093
电气强度(Electric strength)	34 / -	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	600 / -	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	7 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	2.2 / *	%	Sim. to ISO 62
密度(Density)	1090 / -	kg/m³	ISO 1183

Film Properties	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Strain at yield (parallel)	6 / *	%	ISO 527-3

材料特殊性能(Material specific properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	150 / *	cm³/g	ISO 307, 1157, 1628

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	950	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.16	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	2600	J/(kg K)	-

CharacteristicsProcessingInjection Molding, Profile ExtrusionDelivery formPelletsAdditivesRelease agentSpecial CharacteristicsHigh impact or impact modifiedRegional AvailabilityNorth America, Europe, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING .