CELANEX 2402 MT|PBT|Ticona物性表报告及物性特性介绍,CELANEX 2402 MT|PBT|Ticona注塑参数详情-塑料物性表查询网

Product TextsCelanex 2402 MT Natural is an unreinforced PBT with improved flow that 1660 of the Food and Drug . 2402 MT also complies with the corresponding EU and national2402 MT has displayed excellentCelanex

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	40	cm³/10min	ISO 1133
温度(Temperature)	250	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2700	MPa	ISO 527-1/-2
屈服应力(Yield stress)	60	MPa	ISO 527-1/-2
屈服应变(Yield strain)	4	%	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	15	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	135	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	130	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	5	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	4.5	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	225	°C	ISO 11357-1/-3
玻璃化转变温度(Glass transition temperature) (10°C/min)	60	°C	ISO 11357-1/-2
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	60	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	160	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	190	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	110	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8	mm	IEC 60695-11-10

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density)	1310	kg/m³	ISO 1183

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Processing conditions acc. ISO	7790	-	ISO ....-2
Injection Molding, melt temperature	243	°C	ISO 294
Injection Molding, mold temperature	82	°C	ISO 10724
Injection Molding, injection velocity	300	mm/s	ISO 294
Injection Molding, pressure at hold	48	MPa	ISO 294

CharacteristicsProcessingInjection MoldingRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING02%. Drying .