CELANEX 3109HR|PBT-GF7|Ticona物性表报告及物性特性介绍,CELANEX 3109HR|PBT-GF7|Ticona注塑参数详情-塑料物性表查询网

Product TextsCelanex 3109HR is a non-lubricated, 7.5% fiberglass reinforced

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
破坏时应变(Stress at break)	78	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	8	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (-30°C)	190	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	6	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	5.5	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	225	°C	ISO 11357-1/-3
玻璃化转变温度(Glass transition temperature) (10°C/min)	60	°C	ISO 11357-1/-2
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	143	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	206	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	185	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	130	E-6/K	ISO 11359-1/-2
Oxygen index	22	%	ISO 4589-1/-2

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	4	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3.6	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	13	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	200	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E11	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
电气强度(Electric strength)	23	kV/mm	IEC 60243-1

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density)	1350	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体热导率(Thermal conductivity of melt)	0.131	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	1970	J/(kg K)	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Processing conditions acc. ISO	7790	-	ISO ....-2
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	82	°C	ISO 10724
Injection Molding, injection velocity	300	mm/s	ISO 294
Injection Molding, pressure at hold	48	MPa	ISO 294

CharacteristicsProcessingInjection MoldingRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING02%. Drying .