CELANEX 7316|PBT-(GF+P)35|Ticona物性表报告及物性特性介绍,CELANEX 7316|PBT-(GF+P)35|Ticona注塑参数详情-塑料物性表查询网

Product TextsCelanex 7316 is a non-exuding (UL and CSA approved V-0 at 1/32 inch), It is well suited for

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鎷変几妯￠噺(Tensile Modulus)	9200	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Stress at break)	80	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Strain at break)	1.8	%	ISO 527-1/-2
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (+23掳C)	29	kJ/m虏	ISO 179/1eU
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (-30掳C)	29	kJ/m虏	ISO 179/1eU
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (+23掳C)	6.7	kJ/m虏	ISO 179/1eA
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (-30掳C)	6.7	kJ/m虏	ISO 179/1eA

鐑€ц兘(鐑€ц兘(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鐔斿寲娓╁害(鐔斿寲娓╁害(Melting temperature)) (10掳C/min)	225	掳C	ISO 11357-1/-3
鐜荤拑鍖栬浆鍙樻俯搴?Glass transition temperature) (10掳C/min)	60	掳C	ISO 11357-1/-2
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (1.80 MPa)	184	掳C	ISO 75-1/-2
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (0.45 MPa)	212	掳C	ISO 75-1/-2
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (parallel)	30	E-6/K	ISO 11359-1/-2
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (normal)	55	E-6/K	ISO 11359-1/-2
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at thickness h	V-0	class	IEC 60695-11-10
鍘氬害娴嬭瘯(Thickness tested)	0.8	mm	IEC 60695-11-10

鍏朵粬灞炴€?Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
瀵嗗害(Density)	1740	kg/m鲁	ISO 1183

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
Processing conditions acc. ISO	7790	-	ISO ....-2
Injection Molding, melt temperature	260	掳C	ISO 294
Injection Molding, mold temperature	82	掳C	ISO 10724
Injection Molding, injection velocity	300	mm/s	ISO 294
Injection Molding, pressure at hold	48	MPa	ISO 294

CharacteristicsProcessingInjection MoldingDelivery formPelletsRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING02%. Drying .