Crastin庐 S610SF NC010|PBT|DuPont物性表报告及物性特性介绍,Crastin庐 S610SF NC010|PBT|DuPont注塑参数详情-塑料物性表查询网

Product TextsCommon features of Crastin庐 thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin庐 thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL 璇嗗埆(recognition) (class V-0). Crastin庐 thermoplastic polyester resin typically has high chemical aFor disposal, local regulations have to be observed.It has high flow characteristics and is specifically suitable for super fast production.7	%	ISO 294-4, 2577
鎴愬瀷鏀剁缉(Molding shrinkage) (normal)	1.6	%	ISO 294-4, 2577

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鎷変几妯￠噺(Tensile Modulus)	2600	MPa	ISO 527-1/-2
灞堟湇搴斿姏(Yield stress)	60	MPa	ISO 527-1/-2
灞堟湇搴斿彉(Yield strain)	10	%	ISO 527-1/-2
鏂鎷変几搴斿彉(Nominal strain at break)	13	%	ISO 527-1/-2
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (+23掳C)	4	kJ/m虏	ISO 179/1eA
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (-30掳C)	3.5	kJ/m虏	ISO 179/1eA

鐑€ц兘(鐑€ц兘(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鐔斿寲娓╁害(鐔斿寲娓╁害(Melting temperature)) (10掳C/min)	224	掳C	ISO 11357-1/-3
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (1.80 MPa)	54	掳C	ISO 75-1/-2
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (parallel)	130	E-6/K	ISO 11359-1/-2
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (normal)	130	E-6/K	ISO 11359-1/-2
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
鍘氬害娴嬭瘯(Thickness tested)	1.5	mm	IEC 60695-11-10
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at thickness h	HB	class	IEC 60695-11-10
鍘氬害娴嬭瘯(Thickness tested)	0.8	mm	IEC 60695-11-10
Oxygen index	22	%	ISO 4589-1/-2

鐢垫皵鎬ц兘(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鐩稿浠嬬數甯告暟(Relative permittivity) (100Hz)	3.8	-	IEC 60250
鐩稿浠嬬數甯告暟(Relative permittivity) (1MHz)	3.2	-	IEC 60250
鑰楁暎鍥犳暟(鑰楁暎鍥犳暟(Dissipation factor)) (100Hz)	20	E-4	IEC 60250
鑰楁暎鍥犳暟(鑰楁暎鍥犳暟(Dissipation factor)) (1MHz)	200	E-4	IEC 60250
浣撶Н鐢甸樆鐜?Volume resistivity)	>1E13	Ohm*m	IEC 60093
琛ㄩ潰鐢甸樆鐜?Surface resistivity)	1E12	Ohm	IEC 60093
鐢垫皵寮哄害(Electric strength)	26	kV/mm	IEC 60243-1
鐩告瘮婕忕數璧风棔鎸囨暟(Comparative tracking index)	600	-	IEC 60112

鍏朵粬灞炴€?Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鍚告按鐜?Water absorption)	0.4	%	Sim. to ISO 62
鍚告箍鎬?Humidity absorption)	0.2	%	Sim. to ISO 62
瀵嗗害(Density)	1320	kg/m鲁	ISO 1183

娴佸彉璁＄畻灞炴€?Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
瀵嗗害(Density) of melt	1110	kg/m鲁	-
鐔斾綋鐑鐜?Thermal conductivity of melt)	0.21	W/(m K)	-
瑙勬牸鐨勭儹瀹硅瀺鍖?Spec. heat capacity of melt)	2110	J/(kg K)	-
鍠峰皠娓╁害(Ejection temperature)	160	掳C	-

Diagrams ISO 1817 Liquid C) (23掳C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23掳C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23掳C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90掳C)[/td][/tr][tr][td] ISO 1817 Liquid F) (>90掳C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] 4 Brake fluid (130掳C)[/td][/tr][tr][td] .
[/td][/tr][/table]