Crastin® LW9030FR NC010|(PBT+ASA)-GF30 FR(17)|DuPont物性表报告及物性特性介绍,Crastin® LW9030FR NC010|(PBT+ASA)-GF30 FR(17)|DuPont注塑参数详情-塑料物性表查询网

Product TextsCommon features of thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin® thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL 识别(recognition) (class V-0). Crastin® thermoplastic polyester resin typically has high chemical and heat agFor disposal, local regulations have to be observed.It has improved surface aesthetics, excellent dimensional stability and low warpage characteristics.2	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.6	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	10500	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	125	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	1.8	%	ISO 527-1/-2
Tensile creep modulus (1h)	9500	MPa	ISO 899-1
Tensile creep modulus (1000h)	7400	MPa	ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)	40	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	40	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	8	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	8	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	225	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	190	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (8.00 MPa)	106	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	150	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	25	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	80	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-0	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 识别(recognition)	UL	-	-
燃烧性(球压痕硬度(Burning behav)). at thickness h	V-0	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8	mm	IEC 60695-11-10
UL 识别(recognition)	UL	-	-
燃烧性(球压痕硬度(Burning behav)). 5V at thickness h	5VA	class	IEC 60695-11-20
厚度测试(Thickness tested)	3.0	mm	IEC 60695-11-20
Oxygen index	27	%	ISO 4589-1/-2

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3.8	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3.6	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	30	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	150	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	1E14	Ohm	IEC 60093
电气强度(Electric strength)	28	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	400	-	IEC 60112

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.72	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.21	%	Sim. to ISO 62
密度(Density)	1570	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1420	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.26	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	1850	J/(kg K)	-

Diagrams ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (>90°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] 4 Brake fluid (130°C)[/td][/tr][tr][td] .
[/td][/tr][/table]