Hytrel® DYM500BK|(TPC+PBT)-CD|DuPont物性表报告及物性特性介绍,Hytrel® DYM500BK|(TPC+PBT)-CD|DuPont注塑参数详情-塑料物性表查询网

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
熔体流动指数(Melt Flow Index)	14	g/10min	ASTM D 1238
模具收缩(Mold Shrinkage) (MD)	0.017	mm/mm	ASTM D 955
模具收缩(Mold Shrinkage) (TD)	0.015	mm/mm	ASTM D 955
密度(Density) (73°F)	1180	kg/m³	ASTM D 792

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	12.7	cm³/10min	ISO 1133
温度(Temperature)	240	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	1.2	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.3	%	ISO 294-4, 2577
熔体流动指数(熔体流动指数(Melt flow index)) (MFI)	14	g/10min	ISO 1133
MFI温度(MFI temperature)	240	°C	ISO 1133
MFI负载(MFI load)	2.16	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
屈服应力(Yield stress)	10	MPa	ISO 527-1/-2
屈服应变(Yield strain)	40	%	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	>50	%	ISO 527-1/-2
破坏时应变(Stress at break)	35	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	>50	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	N	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	N	kJ/m²	ISO 179/1eU
弯曲弹性模量(Flexural modulus) (23°C)	500	MPa	ISO 178
Stress at 10% elongation	13	MPa	ISO 527-1/-2
Shore D hardness (15s)	50	-	ISO 868
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength) at Break	26	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	510	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	500	MPa	ASTM D 790
Shore D Hardness	55	-	ASTM D 2240
悬臂梁式冲击切口 (1/8 in)	N	kJ/m	ASTM D 256
悬臂梁式冲击切口 (Low-温度(Temperature))	N	kJ/m	ASTM D 256
温度(Temperature)	-40	°C	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔化温度(熔化温度(Melting temperature)) (10°C/min)	223	°C	ISO 11357-1/-3
玻璃化转变温度(Glass transition temperature) (10°C/min)	-60	°C	ISO 11357-1/-2
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	40	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	50	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	137	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	197	E-6/K	ISO 11359-1/-2
ASTM数据(ASTM Data)
DTUL @ 66 psi	55	°C	ASTM D 648
DTUL @ 264 psi	45	°C	ASTM D 648
熔化温度(Melting 温度(Temperature))	223	°C	ASTM D 3418

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
相对介电常数(Relative permittivity) (1MHz)	4.4	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	225	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	5E14	Ohm	IEC 60093
电气强度(Electric strength)	20	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	600	-	IEC 60112

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
吸水率(Water absorption)	0.6	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1180	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formPellets, BlackSpecial CharacteristicsHigh impact or impact modifiedFeaturesCreep ResistanceChemical ResistanceOxidation ResistanceApplicationsAutomotiveRegional Availability .