Hytrel® DYM350BK|(TPC+PBT)|DuPont物性表报告及物性特性介绍,Hytrel® DYM350BK|(TPC+PBT)|DuPont注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	13	cm³/10min	ISO 1133
温度(Temperature)	240	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	1.2	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.3	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	370	MPa	ISO 527-1/-2
屈服应力(Yield stress)	15	MPa	ISO 527-1/-2
屈服应变(Yield strain)	20	%	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	>50	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	N	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	N	kJ/m²	ISO 179/1eU
Puncture - maximum force (+23°C)	3300	N	ISO 6603-2
Puncture energy (+23°C)	40	J	ISO 6603-2
Stress at 10% elongation	13	MPa	ISO 527-1/-2
破坏时应变(Strain at break) TPE	>300	%	ISO 527-1/-2
破坏时应变(Stress at break) TPE	17	MPa	ISO 527-1/-2
抗拉强度(撕裂强度(Tear strength))	160	kN/m	ISO 34-1
Shore D hardness (15s)	50	-	ISO 868
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength) at Break	26	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	590	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	400	MPa	ASTM D 790
Shore D Hardness	55	-	ASTM D 2240
悬臂梁式冲击切口 (1/8 in)	N	kJ/m	ASTM D 256
悬臂梁式冲击切口 (Low-温度(Temperature))	N	kJ/m	ASTM D 256
温度(Temperature)	-40	°C	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	222	°C	ISO 11357-1/-3
玻璃化转变温度(Glass transition temperature) (10°C/min)	-60	°C	ISO 11357-1/-2
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	40	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	50	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	180	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	180	E-6/K	ISO 11359-1/-2
Oxygen index	22	%	ISO 4589-1/-2
ASTM数据(ASTM Data)
DTUL @ 66 psi	54	°C	ASTM D 648
DTUL @ 264 psi	46	°C	ASTM D 648
熔化温度(Melting 温度(Temperature))	223	°C	ASTM D 3418

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	4.6	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	4.4	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	70	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	230	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	5E14	Ohm	IEC 60093
电气强度(Electric strength)	20	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	600	-	IEC 60112

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1000	kg/m³	-
Eff. thermal diffusivity	5.44E-8	m²/s	-

Diagrams ISO 1817 Liquid C) (23°C)

ISO 1817 Liquid 4) (23°C)

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (90°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)