塑胶原料之家
  1. 首页
  2. 中文物性
  3. PBT
  4. Pocan庐 B 4239|PBT-GF30 FR|LANXESS

Pocan庐 B 4239|PBT-GF30 FR|LANXESS

Pocan庐 B 4239|PBT-GF30 FR|LANXESS 物性表: Pocan庐 B 4239|PBT-GF30 FR|LANXESS物性表及特性介绍,Pocan庐 B 4239|PBT-GF30 FR|LANXESS注塑参数详情,如需Pocan庐 B 4239|PBT-GF30 FR|LANXESS下载, 可到相关下载区下载

Product TextsPBT, 30 % glass fibres, injection moulding, flame retardant
娴佸彉鎬ц兘(Rheological properties)值(Value)单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鐔斾綋浣撶Н娴佸姩閫熺巼(Melt volume-flow rate) (MVR)14cm鲁/10minISO 1133
娓╁害(Temperature)260掳CISO 1133
璐熻浇(Load)2.16kgISO 1133
鎴愬瀷鏀剁缉(Molding shrinkage) (parallel)0.3%ISO 294-4, 2577
鎴愬瀷鏀剁缉(Molding shrinkage) (normal)0.9%ISO 294-4, 2577
鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))值(Value)单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鎷変几妯￠噺(Tensile Modulus)10600MPaISO 527-1/-2
鐮村潖鏃跺簲鍙?Stress at break)125MPaISO 527-1/-2
鐮村潖鏃跺簲鍙?Strain at break)2.2%ISO 527-1/-2
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (+23掳C)60kJ/m虏ISO 179/1eU
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (-30掳C)70kJ/m虏ISO 179/1eU
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (+23掳C)12kJ/m虏ISO 179/1eA
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (-30掳C)11kJ/m虏ISO 179/1eA
Puncture - maximum force (+23掳C)669NISO 6603-2
Puncture - maximum force (-30掳C)649NISO 6603-2
Puncture energy (+23掳C)2.3JISO 6603-2
Puncture energy (-30掳C)2.1JISO 6603-2
鐑€ц兘(鐑€ц兘(Thermal properties))值(Value)单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鐔斿寲娓╁害(鐔斿寲娓╁害(Melting temperature)) (10掳C/min)225掳CISO 11357-1/-3
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (1.80 MPa)205掳CISO 75-1/-2
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (0.45 MPa)220掳CISO 75-1/-2
Vicat softening temperature (50掳C/h 50N)205掳CISO 306
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (parallel)30E-6/KISO 11359-1/-2
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (normal)90E-6/KISO 11359-1/-2
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at thickness hV-0classIEC 60695-11-10
鍘氬害娴嬭瘯(Thickness tested)0.8mmIEC 60695-11-10
Oxygen index32%ISO 4589-1/-2
鐢垫皵鎬ц兘(Electrical properties)值(Value)单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鐩稿浠嬬數甯告暟(Relative permittivity) (100Hz)3.9-IEC 60250
鐩稿浠嬬數甯告暟(Relative permittivity) (1MHz)3.8-IEC 60250
鑰楁暎鍥犳暟(鑰楁暎鍥犳暟(Dissipation factor)) (100Hz)60E-4IEC 60250
鑰楁暎鍥犳暟(鑰楁暎鍥犳暟(Dissipation factor)) (1MHz)520E-4IEC 60250
浣撶Н鐢甸樆鐜?Volume resistivity)>1E13Ohm*mIEC 60093
琛ㄩ潰鐢甸樆鐜?Surface resistivity)>1E15OhmIEC 60093
鐢垫皵寮哄害(Electric strength)35kV/mmIEC 60243-1
鐩告瘮婕忕數璧风棔鎸囨暟(Comparative tracking index)275-IEC 60112
鍏朵粬灞炴€?Other properties)值(Value)单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鍚告按鐜?Water absorption)0.35%Sim. to ISO 62
鍚告箍鎬?Humidity absorption)0.1%Sim. to ISO 62
瀵嗗害(Density)1650kg/m鲁ISO 1183
娴佸彉璁＄畻灞炴€?Rheological calculation properties)值(Value)单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
瀵嗗害(Density) of melt1410kg/m鲁-
鐔斾綋鐑鐜?Thermal conductivity of melt)0.243W/(m K)-
瑙勬牸鐨勭儹瀹硅瀺鍖?Spec. heat capacity of melt)1430J/(kg K)-
Eff. thermal diffusivity1.21E-7m虏/s-
鍠峰皠娓╁害(Ejection temperature)170掳C-
Test specimen production值(Value)单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
Injection Molding, melt temperature260掳CISO 294
Injection Molding, mold temperature80掳CISO 10724
Diagrams Water content: 0.04 % .

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-84207.html

免责声明: 本文 Pocan庐 B 4239|PBT-GF30 FR|LANXESS 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4