Pocan® BF 4225|PBT-GF20 FR|LANXESS物性表报告及物性特性介绍,Pocan® BF 4225|PBT-GF20 FR|LANXESS注塑参数详情-塑料物性表查询网

Product TextsPBT, 20 % glass fibres, injection moulding, flame retardant

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	19	cm³/10min	ISO 1133
温度(Temperature)	260	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.5	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.1	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	8500	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	120	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	2.4	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	40	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	40	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	10	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	10	kJ/m²	ISO 179/1eA
Puncture energy (+23°C)	1.8	J	ISO 6603-2

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	225	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	210	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	220	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	205	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	30	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	120	E-6/K	ISO 11359-1/-2

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3.8	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3.6	-	IEC 60250
电气强度(Electric strength)	29	kV/mm	IEC 60243-1

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density)	1600	kg/m³	ISO 1183

材料特殊性能(Material specific properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	97	cm³/g	ISO 307, 1157, 1628

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesLubricantsSpecial CharacteristicsFlame retardantRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base .