Ultradur® B 4300 G4|PBT-GF20|BASF物性表报告及物性特性介绍,Ultradur® B 4300 G4|PBT-GF20|BASF注塑参数详情-塑料物性表查询网

Product TextsEasy flowing injection molding grade with 20 % glass fibers; for rigid, tough and dimensionally stable technical parts (eg car-door handles, housings for small electric motors, headlamp retainers and drum controllers).003	mm/mm	ASTM D 955
密度(Density) (73°F)	1450	kg/m³	ASTM D 792

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	15	cm³/10min	ISO 1133
温度(Temperature)	250	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.4	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.2	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	7000	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	115	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	3.5	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	54	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	50	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	6	kJ/m²	ISO 179/1eA
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	7515.27	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	120	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	3	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	6143.22	MPa	ASTM D 790

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	223	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	205	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	220	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	35	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6	mm	IEC 60695-11-10
UL 识别(recognition)	UL	-	-
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.4	mm	IEC 60695-11-10
UL 识别(recognition)	UL	-	-
Oxygen index	19.5	%	ISO 4589-1/-2
ASTM数据(ASTM Data)
DTUL @ 66 psi	220	°C	ASTM D 648
DTUL @ 264 psi	205	°C	ASTM D 648
熔化温度(Melting 温度(Temperature))	223	°C	ASTM D 3418

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3.7	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3.7	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	12	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	150	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	1E13	Ohm	IEC 60093
电气强度(Electric strength)	37	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	300	-	IEC 60112

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.4	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1450	kg/m³	ISO 1183

材料特殊性能(Material specific properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	107	cm³/g	ISO 307, 1157, 1628

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1190	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.19	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	1890	J/(kg K)	-
喷射温度(Ejection temperature)	175	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294

DiagramsV. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING allowed water content: .04 % ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] .
[/td][/tr][/table]