Valox VX4910|(PBT+ASA)-GX10|沙特基础物性表报告及物性特性介绍,Valox VX4910|(PBT+ASA)-GX10|沙特基础注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	25	cm³/10min	ISO 1133
温度(Temperature)	250	°C	ISO 1133
负载(Load)	5	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	4600	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	80	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	3	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	45	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	20	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	6	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	5	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	3800	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	5	kJ/m²	ISO 180/1A
悬臂梁式冲击切口	5	kJ/m²	ISO 180/1A
温度(Temperature)	-30	°C	ISO 180/1A
悬臂梁式冲击无切口(Izod Impact unnotched) (23°C)	30	kJ/m²	ISO 180/1U
洛氏硬度(Rockwell hardness)	R 120	-	ISO 2039-2
球压痕硬度(Ball indentation hardness)	100	MPa	ISO 2039-1
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	4600	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Yield	80	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	80	MPa	ASTM D 638
屈服伸长率(Elongation at Yield)	3	%	ASTM D 638
断裂伸长率(Elongation at Break)	3	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	3400	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.055	kJ/m	ASTM D 256
悬臂梁式冲击切口 (Low-温度(Temperature))	0.045	kJ/m	ASTM D 256
温度(Temperature)	-30	°C	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	130	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	205	°C	ISO 75-1/-2
Vicat softening temperature A	218	°C	ISO 306
维卡软化温度（50℃/ h的50N）Vicat softening temperature	150	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	41.1	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	81.2	E-6/K	ISO 11359-1/-2
ASTM数据(ASTM Data)
DTUL @ 66 psi	205	°C	ASTM D 648
DTUL @ 264 psi	130	°C	ASTM D 648
Vicat 温度(Temperature)	218	°C	ASTM D 1525

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
相对介电常数(Relative permittivity) (1MHz)	3.4	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	200	E-4	IEC 60250
ASTM数据(ASTM Data)
耗散因数(Dissipation Factor) (1 MHz)	0.02	-	ASTM D 150
介电常数(Dielectric Constant) (1 MHz)	3.4	-	ASTM D 150

CharacteristicsProcessingInjection MoldingFeaturesNucleatedRegional AvailabilityEurope, Near East/AfricaDisclaimerCopyright M-Base .