Amodel® AS-1566 HS|PPA-(GF+MD)66|Solvay物性表报告及物性特性介绍,Amodel® AS-1566 HS|PPA-(GF+MD)66|Solvay注塑参数详情-塑料物性表查询网

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	22500	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	200	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	1.4	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	34	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	6.1	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	20500	MPa	ISO 178
弯曲弹性模量(Flexural modulus)	6410	MPa	ISO 178
弯曲弹性模量(Flexural modulus) temperature	175	°C	ISO 178
悬臂梁式冲击切口 (23°C)	6.5	kJ/m²	ISO 180/1A
悬臂梁式冲击无切口(Izod Impact unnotched) (23°C)	44	kJ/m²	ISO 180/1U
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	19994.8	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	207	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	1.7	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	18615.8	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.0641	kJ/m	ASTM D 256
悬臂梁式冲击无切口(Izod Impact unnotched) (1/8 in)	0.59	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔化温度(熔化温度(Melting temperature)) (10°C/min)	311	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	280	°C	ISO 75-1/-2

Diagrams .