HP515-00|PP-T10|RheTech物性表报告及物性特性介绍,HP515-00|PP-T10|RheTech注塑参数详情-塑料物性表查询网

HP515-00|PP-T10|RheTech

HP515-00|PP-T10|RheTech 物性表: HP515-00|PP-T10|RheTech物性表及特性介绍,HP515-00|PP-T10|RheTech注塑参数详情,如需HP515-00|PP-T10|RheTech下载, 可到相关下载区下载

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM鏁版嵁(ASTM Data)
鐔斾綋娴佸姩鎸囨暟(Melt Flow Index)	38	g/10min	ASTM D 1238
娓╁害(Temperature)	230	掳C	-
璐熻浇(Load)	2.16	kg	-
瀵嗗害(Density) (73掳F)	970	kg/m鲁	ASTM D 792

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM鏁版嵁(ASTM Data)
鎶楁媺寮哄害(Tensile Strength)	26	MPa	ASTM D 638
寮洸寮规€фā閲?寮洸寮规€фā閲?Flexural Modulus))	2034	MPa	ASTM D 790
Shore D Hardness	68	-	ASTM D 2240
Gardner Impact	13.6	J	ASTM D2794,4226,5420
鎮噦姊佸紡鍐插嚮鍒囧彛 (1/8 in)	0.059	kJ/m	ASTM D 256

鐑€ц兘(鐑€ц兘(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM鏁版嵁(ASTM Data)
DTUL @ 66 psi	126	掳C	ASTM D 648
DTUL @ 264 psi	63	掳C	ASTM D 648
鐔斿寲娓╁害(Melting 娓╁害(Temperature))	161	掳C	ASTM D 3418

CharacteristicsProcessingInjection MoldingDelivery formPellets, Natural ColorFeaturesLow Odor, CopolymerRegional AvailabilityNorth AmericaDisclaimerCopyright M-Base .

关键词:
RheTech
PP-T10
HP515-00

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-87697.html

免责声明: 本文 HP515-00|PP-T10|RheTech 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络