INNOPOL® CS 1-3120 N DEL|PP-T20|Inno-Comp物性表报告及物性特性介绍,INNOPOL® CS 1-3120 N DEL|PP-T20|Inno-Comp注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	9	cm³/10min	ISO 1133
温度(Temperature)	230	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	1.0	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.8	%	ISO 294-4, 2577
熔体流动指数(熔体流动指数(Melt flow index)) (MFI)	8	g/10min	ISO 1133
MFI温度(MFI temperature)	230	°C	ISO 1133
MFI负载(MFI load)	2.16	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	2650	MPa	ISO 527-1/-2
屈服应力(Yield stress)	35	MPa	ISO 527-1/-2
屈服应变(Yield strain)	5	%	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	22	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	49	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	18	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	3	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	1.4	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	2800	MPa	ISO 178

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔化温度(熔化温度(Melting temperature)) (10°C/min)	162	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	71	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	128	°C	ISO 75-1/-2
Burning behav. at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6	mm	IEC 60695-11-10

ColorFeaturesHomopolymerApplicationsAutomotiveRegional AvailabilityEuropeDisclaimerCopyright M-Base .