Maxxam™ FR PP FR 8-6a|PP-T|PolyOne物性表报告及物性特性介绍,Maxxam™ FR PP FR 8-6a|PP-T|PolyOne注塑参数详情-塑料物性表查询网

Maxxam™ FR PP FR 8-6a|PP-T|PolyOne

Maxxam™ FR PP FR 8-6a|PP-T|PolyOne 物性表: Maxxam™ FR PP FR 8-6a|PP-T|PolyOne物性表及特性介绍,Maxxam™ FR PP FR 8-6a|PP-T|PolyOne注塑参数详情,如需Maxxam™ FR PP FR 8-6a|PP-T|PolyOne下载, 可到相关下载区下载

Product TextsMaxxam™ FR flame-retardant polyolefin compounds and masterbatches meet stringent flammability performance requirements defined by industry agencies, including Underwriters Laboratories UL 94 V-2, V-0, and 5VA performance ratings. In addition, many compounds in the Maxxam FR portfolio offer elevated Relative Thermal Index (RTI) ratings.

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
熔体流动指数(Melt Flow Index)	7.3	g/10min	ASTM D 1238
温度(Temperature)	230	°C	-
负载(Load)	2.16	kg	-
密度(Density) (73°F)	1300	kg/m³	ASTM D 792

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength) at Yield	17.9	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	25	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	1720	MPa	ASTM D 790
抗弯强度(Flexural Strength)	24.8	MPa	ASTM D 790
Gardner Impact	16.9	J	ASTM D2794,4226,5420
悬臂梁式冲击切口 (1/8 in)	0.112	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	V-0	-	UL 94
厚度测试(Thickness tested)	0.8	mm	-
DTUL @ 66 psi	90	°C	ASTM D 648
极限氧指数(Limiting 氧指数(Oxygen Index))	27	%	ASTM D 2863

CharacteristicsProcessingInjection MoldingDelivery formPelletsSpecial CharacteristicsFlame retardant, High impact or impact modifiedRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America,.

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-88249.html

免责声明: 本文 Maxxam™ FR PP FR 8-6a|PP-T|PolyOne 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络