Polifil庐 RMT-40|PP-T40|The Plastics Group物性表报告及物性特性介绍,Polifil庐 RMT-40|PP-T40|The Plastics Group注塑参数详情-塑料物性表查询网

Polifil庐 RMT-40|PP-T40|The Plastics Group

Polifil庐 RMT-40|PP-T40|The Plastics Group 物性表: Polifil庐 RMT-40|PP-T40|The Plastics Group物性表及特性介绍,Polifil庐 RMT-40|PP-T40|The Plastics Group注塑参数详情,如需Polifil庐 RMT-40|PP-T40|The Plastics Group下载, 可到相关下载区下载

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM鏁版嵁(ASTM Data)
鐔斾綋娴佸姩鎸囨暟(Melt Flow Index)	10	g/10min	ASTM D 1238
娓╁害(Temperature)	230	掳C	-
璐熻浇(Load)	2.16	kg	-
妯″叿鏀剁缉(Mold Shrinkage) (MD)	0.009	mm/mm	ASTM D 955
瀵嗗害(Density) (73掳F)	1240	kg/m鲁	ASTM D 792

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM鏁版嵁(ASTM Data)
鎷変几妯￠噺(Tensile Modulus)	2344.21	MPa	ASTM D 638
鎶楁媺寮哄害(Tensile Strength)	25.9	MPa	ASTM D 638
屈服伸长率(Elongation at Yield)	6	%	ASTM D 638
鏂浼搁暱鐜?Elongation at Break)	18	%	ASTM D 638
寮洸寮规€фā閲?寮洸寮规€фā閲?Flexural Modulus))	2482.11	MPa	ASTM D 790
鎶楀集寮哄害(Flexural Strength)	46.2	MPa	ASTM D 790
Gardner Impact	4.52	J	ASTM D2794,4226,5420
鎮噦姊佸紡鍐插嚮鍒囧彛 (1/8 in)	0.0534	kJ/m	ASTM D 256

鐑€ц兘(鐑€ц兘(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM鏁版嵁(ASTM Data)
DTUL @ 66 psi	118	掳C	ASTM D 648
DTUL @ 264 psi	62.8	掳C	ASTM D 648

CharacteristicsProcessingInjection MoldingDelivery formPelletsSpecial CharacteristicsHigh impact or impact modified, Heat stabilized or stable to heatFeaturesLow OdorApplicationsAutomotive, Electrical and ElectronicalRegional AvailabilityNorth AmericaDisclaimerCopyright M-Base .

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-89057.html

免责声明: 本文 Polifil庐 RMT-40|PP-T40|The Plastics Group 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络