POLYFORT® FPP 30 GFC K1079|PP-GF30|A. Schulman物性表报告及物性特性介绍,POLYFORT® FPP 30 GFC K1079|PP-GF30|A. Schulman注塑参数详情-塑料物性表查询网

Schulman Product Texts30% chemical coupled glass fibre reinforced PP-homopolymer; long term heat stabilized; meets VW-TL PP1016

ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	6400	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	85	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	2	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	45	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	44	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	10	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	8	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	165	°C	ISO 11357-1/-3
玻璃化转变温度(Glass transition temperature) (10°C/min)	-10	°C	ISO 11357-1/-2
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	145	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	160	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	136	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	80	E-6/K	ISO 11359-1/-2

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	2.9	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	2.6	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	20	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	10	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	>1E15	Ohm	IEC 60093

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.03	%	Sim. to ISO 62
密度(Density)	1130	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1100	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.3	W/(m K)	-
喷射温度(Ejection temperature)	110	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Processing conditions acc. ISO	1870	-	ISO ....-2
Injection Molding, melt temperature	230	°C	ISO 294
Injection Molding, mold temperature	40	°C	ISO 10724
Injection Molding, injection velocity	220	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

CharacteristicsProcessingInjection MoldingDelivery formGranulesAdditivesRelease agentSpecial CharacteristicsU.V. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSINGPretreatment .
[/td][/tr][/table]