PPH2MF-3|PP-P30|Washington Penn物性表报告及物性特性介绍,PPH2MF-3|PP-P30|Washington Penn注塑参数详情-塑料物性表查询网

PPH2MF-3|PP-P30|Washington Penn

PPH2MF-3|PP-P30|Washington Penn 物性表: PPH2MF-3|PP-P30|Washington Penn物性表及特性介绍,PPH2MF-3|PP-P30|Washington Penn注塑参数详情,如需PPH2MF-3|PP-P30|Washington Penn下载, 可到相关下载区下载

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
熔体流动指数(Melt Flow Index)	7	g/10min	ASTM D 1238
模具收缩(Mold Shrinkage) (MD)	0.008	mm/mm	ASTM D 955
密度(Density) (73°F)	1130	kg/m³	ASTM D 792
吸水率(Water Absorption) (24hr)	0.04	%	ASTM D 570

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength) at Yield	43.4	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	5	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	5033.16	MPa	ASTM D 790
抗弯强度(Flexural Strength)	75.2	MPa	ASTM D 790
Shore D Hardness	58	-	ASTM D 2240

CharacteristicsProcessingInjection MoldingFeaturesChemically Coupled Reinforcement, HomopolymerRegional AvailabilityNorth AmericaDisclaimerCopyright M-Base .

关键词:
Washington Penn
PP-P30
PPH2MF-3

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-89778.html

免责声明: 本文 PPH2MF-3|PP-P30|Washington Penn 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络