PPH1CF-4|PP-K40|Washington Penn物性表报告及物性特性介绍,PPH1CF-4|PP-K40|Washington Penn注塑参数详情-塑料物性表查询网

PPH1CF-4|PP-K40|Washington Penn

PPH1CF-4|PP-K40|Washington Penn 物性表: PPH1CF-4|PP-K40|Washington Penn物性表及特性介绍,PPH1CF-4|PP-K40|Washington Penn注塑参数详情,如需PPH1CF-4|PP-K40|Washington Penn下载, 可到相关下载区下载

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
熔体流动指数(Melt Flow Index)	3	g/10min	ASTM D 1238
模具收缩(Mold Shrinkage) (MD)	0.014	mm/mm	ASTM D 955
密度(Density) (73°F)	1230	kg/m³	ASTM D 792

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength) at Yield	24.1	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	250	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	2137.37	MPa	ASTM D 790
抗弯强度(Flexural Strength)	44.8	MPa	ASTM D 790
Shore D Hardness	86	-	ASTM D 2240
悬臂梁式冲击切口 (1/8 in)	0.0801	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
DTUL @ 264 psi	82.8	°C	ASTM D 648
熔化温度(Melting 温度(Temperature))	193	°C	ASTM D 3418
Max. Service Temp. (Intermittent)	149	°C	ASTM D 2485
Max. Service Temp. (Continous)	149	°C	ASTM D 2485

CharacteristicsProcessingInjection MoldingFeaturesHomopolymerRegional AvailabilityNorth AmericaDisclaimerCopyright M-Base .

关键词:
Washington Penn
PP-K40
PPH1CF-4

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-89802.html

免责声明: 本文 PPH1CF-4|PP-K40|Washington Penn 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络