Thermocomp MF006AL|PP-GF|SABIC_IP物性表报告及物性特性介绍,Thermocomp MF006AL|PP-GF|SABIC

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	7040	MPa	ISO 527-1/-2
屈服应变(Yield strain)	0.9	%	ISO 527-1/-2
破坏时应变(Stress at break)	43	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	0.9	%	ISO 527-1/-2
弯曲弹性模量(Flexural modulus) (23°C)	6190	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	4	kJ/m²	ISO 180/1A
悬臂梁式冲击无切口(Izod Impact unnotched) (23°C)	8	kJ/m²	ISO 180/1U
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	8239.98	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Yield	46	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	35	MPa	ASTM D 638
屈服伸长率(Elongation at Yield)	0.9	%	ASTM D 638
断裂伸长率(Elongation at Break)	0.9	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	6290	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.039	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	100	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	134	°C	ISO 75-1/-2
ASTM数据(ASTM Data)
DTUL @ 66 psi	141	°C	ASTM D 648
DTUL @ 264 psi	106	°C	ASTM D 648

CharacteristicsProcessingInjection MoldingRegional AvailabilityNorth America, South and Central AmericaDisclaimerCopyright M-Base .