Thermylene P6-30FG-0684|PP-GF30|Asahi Kasei物性表报告及物性特性介绍,Thermylene P6-30FG-0684|PP-GF30|Asahi Kasei注塑参数详情-塑料物性表查询网

Thermylene P6-30FG-0684|PP-GF30|Asahi Kasei

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
熔体流动指数(Melt Flow Index)	4	g/10min	ASTM D 1238
温度(Temperature)	230	°C	-
负载(Load)	2.16	kg	-
模具收缩(Mold Shrinkage) (MD)	0.003	mm/mm	ASTM D 955
密度(Density) (73°F)	1130	kg/m³	ASTM D 792
吸水率(Water Absorption) (24hr)	0.02	%	ASTM D 570

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength)	89.6	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	3	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	5102.11	MPa	ASTM D 790
抗弯强度(Flexural Strength)	124	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	R 95	-	ASTM D 785
悬臂梁式冲击切口 (1/8 in)	0.107	kJ/m	ASTM D 256
悬臂梁式冲击无切口(Izod Impact unnotched) (1/8 in)	0.641	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	HB	-	UL 94
厚度测试(Thickness tested)	1.59	mm	-
热膨胀系数(Coefficient of Thermal Expansion) (MD)	37.8	E-6/K	ASTM D 696
DTUL @ 66 psi	160	°C	ASTM D 648
DTUL @ 264 psi	150	°C	ASTM D 648

CharacteristicsProcessingInjection MoldingDelivery formPelletsSpecial CharacteristicsU.V. stabilized or stable to weather, Heat stabilized or stable to heatFeaturesChemically Coupled Reinforcement, HomopolymerChemical ResistanceGeneral Chemical Resistance, Environmental Stress Crack ResistanceApplicationsAutomotive, Electrical and ElectronicalRegional AvailabilityNorth AmericaDisclaimerCopyright M-Base .

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-91263.html

免责声明: 本文 Thermylene P6-30FG-0684|PP-GF30|Asahi Kasei 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络