Verton MV00ASXP|PP-GF|SABIC_IP物性表报告及物性特性介绍,Verton MV00ASXP|PP-GF|SABIC

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	13900	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	141	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	1.7	%	ISO 527-1/-2
弯曲弹性模量(Flexural modulus) (23°C)	11100	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	29	kJ/m²	ISO 180/1A
悬臂梁式冲击无切口(Izod Impact unnotched) (23°C)	66	kJ/m²	ISO 180/1U
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	10440	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	131	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	1.8	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	9339.97	MPa	ASTM D 790
抗弯强度(Flexural Strength)	187	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.208	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	160	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	164	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	33.7	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	45.8	E-6/K	ISO 11359-1/-2
ASTM数据(ASTM Data)
热膨胀系数(Coefficient of Thermal Expansion) (MD)	33.6	E-6/K	ASTM D 696
热膨胀系数(Coefficient of Thermal Expansion) (TD)	45.7	E-6/K	ASTM D 696
DTUL @ 264 psi	157	°C	ASTM D 648

CharacteristicsProcessingInjection MoldingFeaturesChemically Coupled ReinforcementRegional AvailabilityEurope,.