Akulon® K224-LGM35|PA6-(GF+MD)40|DSM物性表报告及物性特性介绍,Akulon® K224-LGM35|PA6-(GF+MD)40|DSM注塑参数详情-塑料物性表查询网

Product Texts15% Glass Reinforced, 25% Mineral Reinforced, Improved UV-stability of deflection under load (1.80 MPa)	205 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	215 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	18 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	100 / *	E-6/K	ISO 11359-1/-2

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3.5 / 14	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3.3 / 4.5	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	50 / 3200	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	140 / 1200	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E12 / 1E10	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E13	Ohm	IEC 60093
电气强度(Electric strength)	35 / 30	kV/mm	IEC 60243-1

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸湿性(Humidity absorption)	1.7 / *	%	Sim. to ISO 62
密度(Density)	1490 / *	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesLubricants, Release agentSpecial CharacteristicsLight stabilized or stable to light, U.V. stabilized or stable to weatherRegional AvailabilityNorth AmericaOther text informationInjection moldingInjection Molding Recommendations

Application examples
Weber Grill Handles