Armamid PA6-4T|PA6|Polyplastic物性表报告及物性特性介绍,Armamid PA6-4T|PA6|Polyplastic注塑参数详情-塑料物性表查询网

Product TextsThe data for this material was provided by Plastinfo.ru.

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	10	cm³/10min	ISO 1133
温度(Temperature)	250	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	1.1	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.1	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
屈服应力(Yield stress)	46	MPa	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	>50	%	ISO 527-1/-2
破坏时应变(Strain at break)	>50	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	25	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	1300	MPa	ISO 178

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	120	E-6/K	ISO 11359-1/-2

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
体积电阻率(Volume resistivity)	1E13	Ohm*m	IEC 60093
电气强度(Electric strength)	23	kV/mm	IEC 60243-1

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
密度(Density)	1070	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formBulk Molding Compound, Natural ColorAdditivesRelease agentSpecial CharacteristicsHigh impact or impact modified, Heat stabilized or stable to heatChemical ResistanceAcid Resistance, Alkali Resistance, General Chemical Resistance, Solvent Resistance, Oil Resistance, Oxidation ResistanceApplicationsAutomotive, Building Construction, Electrical and Electronical, General PurposeRegional AvailabilityEuropeDisclaimerCopyright M-Base .