BERGAMID庐 B70/80G/GK30TM-Y|PA6-(GF+GB)30|PolyOne物性表报告及物性特性介绍,BERGAMID庐 B70/80G/GK30TM-Y|PA6-(GF+GB)30|PolyOne注塑参数详情-塑料物性表查询网

Product TextsBERGAMID B70/80G30TM-Y, PA6 reinforced5 / 5.5	%	ISO 527-1/-2
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (+23掳C)	65 / 85	kJ/m虏	ISO 179/1eU
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (-30掳C)	55 / -	kJ/m虏	ISO 179/1eU
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (+23掳C)	14 / 22	kJ/m虏	ISO 179/1eA
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (-30掳C)	12 / -	kJ/m虏	ISO 179/1eA

鐑€ц兘(鐑€ц兘(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鐔斿寲娓╁害(鐔斿寲娓╁害(Melting temperature)) (10掳C/min)	223 / *	掳C	ISO 11357-1/-3
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (1.80 MPa)	190 / *	掳C	ISO 75-1/-2
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (0.45 MPa)	205 / *	掳C	ISO 75-1/-2
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
鍘氬害娴嬭瘯(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
鍘氬害娴嬭瘯(Thickness tested)	0.8 / *	mm	IEC 60695-11-10

鐢垫皵鎬ц兘(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鐩稿浠嬬數甯告暟(Relative permittivity) (1MHz)	3.8 / 6.8	-	IEC 60250
鑰楁暎鍥犳暟(鑰楁暎鍥犳暟(Dissipation factor)) (1MHz)	270 / 2400	E-4	IEC 60250
浣撶Н鐢甸樆鐜?Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
琛ㄩ潰鐢甸樆鐜?Surface resistivity)	* / 1E10	Ohm	IEC 60093
鐩告瘮婕忕數璧风棔鎸囨暟(Comparative tracking index)	- / 500	-	IEC 60112

鍏朵粬灞炴€?Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鍚告按鐜?Water absorption)	5.9 / *	%	Sim. to ISO 62
鍚告箍鎬?Humidity absorption)	1.9 / *	%	Sim. to ISO 62
瀵嗗害(Density)	1330 / -	kg/m鲁	ISO 1183

鏉愭枡鐗规畩鎬ц兘(Material specific properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
绮樻暟(Viscosity number)	150 / *	cm鲁/g	ISO 307, 1157, 1628

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
Injection Molding, melt temperature	270	掳C	ISO 294
Injection Molding, mold temperature	80	掳C	ISO 10724

CharacteristicsProcessingInjection MoldingDelivery formPelletsRegional AvailabilityEuropeOther text informationInjection moldingPREPROCESSING Water Content0,1% ISO 1817 Liquid F) (23掳C)[/td][/tr][tr][td] ISO 1817 Liquid F) (>90掳C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] 4 Brake fluid (130掳C)[/td][/tr][tr][td] .
[/td][/tr][/table]