Durethan® BCF 30X H2.0|PA6-(GF+CF)30|LANXESS物性表报告及物性特性介绍,Durethan® BCF 30X H2.0|PA6-(GF+CF)30|LANXESS注塑参数详情-塑料物性表查询网

0 | PA6-(GF+CF)30 |LANXESS Product TextsPA 6, 30 % glass fibres/carbon fibres, injection moulding, heat-ageing stabilized, improved electrical conductivity

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	15 / *	cm³/10min	ISO 1133
温度(Temperature)	260 / *	°C	ISO 1133
负载(Load)	5 / *	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.2 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.6 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	12500 / 6300	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	180 / 100	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	2.4 / 5	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	70 / 80	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	60 / 60	kJ/m²	ISO 179/1eU
Puncture energy (+23°C)	2.4 / -	J	ISO 6603-2
Puncture energy (-30°C)	1.7 / 1.7	J	ISO 6603-2

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	218 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	205 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	219 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	20 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	90 / *	E-6/K	ISO 11359-1/-2

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相比漏电起痕指数(Comparative tracking index)	150 / -	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density)	1350 / -	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formPelletsSpecial CharacteristicsIncreased electrical conductivityRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING Water content: 0.1 % .