Durethan® DP 1441/40 H2.0 EF|PA6-(GF+MD)40|LANXESS物性表报告及物性特性介绍,Durethan® DP 1441/40 H2.0 EF|PA6-(GF+MD)40|LANXESS注塑参数详情-塑料物性表查询网

0 EF | PA6-(GF+MD)40 |LANXESS Product TextsPA 6, 40 % glass fibres/mineral, injection moulding, improved flowability, heat-ageing stabilized, low tendency to warp, improved surface finish

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	60 / *	cm³/10min	ISO 1133
温度(Temperature)	270 / *	°C	ISO 1133
负载(Load)	5 / *	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	8500 / 4500	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	135 / 65	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	2.8 / 8.7	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	40 / 65	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	40 / 45	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	5 / 8	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	222 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	200 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	215 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	30 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	90 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8 / *	mm	IEC 60695-11-10

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density)	1440 / -	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1220	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.253	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	2020	J/(kg K)	-
Eff. thermal diffusivity	1.03E-7	m²/s	-
喷射温度(Ejection temperature)	140	°C	-

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesRelease agentRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING Water content: 0.1 % .