Grilamid XE 4106 black 9992|PA612-GF30|EMS-GRIVORY物性表报告及物性特性介绍,Grilamid XE 4106 black 9992|PA612-GF30|EMS-GRIVORY注塑参数详情-塑料物性表查询网

Product TextsProduct-nomenclature according to ISO 1874: and electronics, lighting, Cooling and climate control, Fuel systems, Powertrain and Chassis , Interior, Exterior
	Electricals & Electronics
	Electrical appliances, Electrical equipment, Connectors, Mobile phones and other portable devices,3 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.9 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	9500 / 7500	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	150 / 115	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	4.5 / 6.5	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	90 / 90	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	95 / 90	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	15 / 16	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	10 / 10	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	215 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	185 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (8.00 MPa)	110 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	30 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	100 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8 / *	mm	IEC 60695-11-10

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
体积电阻率(Volume resistivity)	1E10 / 1E10	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E11	Ohm	IEC 60093
电气强度(Electric strength)	36 / 36	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	- / 600	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	2 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.9 / *	%	Sim. to ISO 62
密度(Density)	1300 / -	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formPelletsSpecial CharacteristicsLight stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, .
[/td][/tr][/table]