Nymax™ 1108 A HS Natural|PA6|PolyOne物性表报告及物性特性介绍,Nymax™ 1108 A HS Natural|PA6|PolyOne注塑参数详情-塑料物性表查询网

Nymax™ 1108 A HS Natural|PA6|PolyOne

Nymax™ 1108 A HS Natural|PA6|PolyOne 物性表: Nymax™ 1108 A HS Natural|PA6|PolyOne物性表及特性介绍,Nymax™ 1108 A HS Natural|PA6|PolyOne注塑参数详情,如需Nymax™ 1108 A HS Natural|PA6|PolyOne下载, 可到相关下载区下载

Product TextsThe Nymax® Series of nylon 6 compounds have been specifically developed to deliver outstanding performance in a wide range of application areas. These materials are available with a broad range of fillers, glass reinforcement levels, and impact modifiers depending upon grade selected and have been formulated to offer ease of processing in most standard thermoplastic processing equipment.

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
模具收缩(Mold Shrinkage) (MD)	0.014	mm/mm	ASTM D 955
密度(Density) (73°F)	1100	kg/m³	ASTM D 792
吸水率(Water Absorption) (24hr)	1	%	ASTM D 570

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength) at Break	64.1	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	100	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	2240	MPa	ASTM D 790
抗弯强度(Flexural Strength)	88.3	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.118	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
DTUL @ 264 psi	57	°C	ASTM D 648
熔化温度(Melting 温度(Temperature))	216	°C	ASTM D 3418

CharacteristicsProcessingInjection MoldingDelivery formPellets, Natural ColorSpecial CharacteristicsHigh impact or impact modified, Heat stabilized or stable to heatApplicationsAutomotive, General PurposeRegional AvailabilityNorth America, South and Central AmericaDisclaimerCopyright M-Base .

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-93487.html

免责声明: 本文 Nymax™ 1108 A HS Natural|PA6|PolyOne 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络