Tarnamid® T-27 GF40 I|PA6-GF40|Grupa Azoty物性表报告及物性特性介绍,Tarnamid® T-27 GF40 I|PA6-GF40|Grupa Azoty注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	25 / *	cm³/10min	ISO 1133
温度(Temperature)	275 / *	°C	ISO 1133
负载(Load)	5 / *	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.4 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.0 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	11200 / -	MPa	ISO 527-1/-2
抗拉强度(Tensile Strength)	160 / -	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	5 / -	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	100 / -	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	25 / -	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	9400 / -	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	30 / -	kJ/m²	ISO 180/1A
球压痕硬度(Ball indentation hardness)	195 / -	MPa	ISO 2039-1

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
熔化温度(熔化温度(Melting temperature)) (10°C/min)	221 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	205 / *	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	215 / *	°C	ISO 306
燃烧性厚度(Burning behav. at thickness h)	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	3.2 / *	mm	IEC 60695-11-10

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
相对介电常数(Relative permittivity) (1MHz)	3.7 / 4.7	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	160 / -	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E11	Ohm	IEC 60093
电气强度(Electric strength)	31 / 27	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	525 / 525	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
吸水率(Water absorption)	6.8 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	1.7 / *	%	Sim. to ISO 62
密度(Density)	1430 / -	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formGranules, Black, Natural ColorSpecial CharacteristicsHigh impact or impact modified, Heat stabilized or stable to heatApplicationsAutomotive, Building Construction, Electrical and ElectronicalRegional AvailabilityEuropeDisclaimerCopyright M-Base .