Taromid B 280 G2|PA6-GF10|Taro Plast物性表报告及物性特性介绍,Taromid B 280 G2|PA6-GF10|Taro Plast注塑参数详情-塑料物性表查询网

娴佸彉鎬ц兘(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
鐔斾綋娴佸姩鎸囨暟(鐔斾綋娴佸姩鎸囨暟(Melt flow index)) (MFI)	15	g/10min	ISO 1133
MFI温度(MFI temperature)	250	掳C	ISO 1133
MFI负载(MFI load)	2.16	kg	ISO 1133

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
鎷変几妯￠噺(Tensile Modulus)	4700	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Stress at break)	105	MPa	ISO 527-1/-2
鐮村潖鏃跺簲鍙?Strain at break)	7	%	ISO 527-1/-2
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (+23掳C)	5	kJ/m虏	ISO 179/1eA
寮洸寮规€фā閲?Flexural modulus) (23掳C)	4500	MPa	ISO 178
ASTM鏁版嵁(ASTM Data)
鎮噦姊佸紡鍐插嚮鍒囧彛 (1/8 in)	0.055	kJ/m	ASTM D 256

鐑€ц兘(鐑€ц兘(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
鐔斿寲娓╁害(鐔斿寲娓╁害(Melting temperature)) (10掳C/min)	222	掳C	ISO 11357-1/-3
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (1.80 MPa)	90	掳C	ISO 75-1/-2
Vicat softening temperature A	214	掳C	ISO 306
Vicat softening temperature (50掳C/h 50N)	205	掳C	ISO 306
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (parallel)	50	E-6/K	ISO 11359-1/-2
ASTM鏁版嵁(ASTM Data)
UL 94 闃荤噧绛夌骇(Flame rating)	HB	-	UL 94
鍘氬害娴嬭瘯(Thickness tested)	1.6	mm	-
鏋侀檺姘ф寚鏁?Limiting 姘ф寚鏁?Oxygen Index))	24	%	ASTM D 2863

鐢垫皵鎬ц兘(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
浣撶Н鐢甸樆鐜?Volume resistivity)	>1E13	Ohm*m	IEC 60093
鐩告瘮婕忕數璧风棔鎸囨暟(Comparative tracking index)	500	-	IEC 60112

鍏朵粬灞炴€?Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO鏁版嵁
鍚告按鐜?Water absorption)	7.6	%	Sim. to ISO 62
瀵嗗害(Density)	1180	kg/m鲁	ISO 1183

CharacteristicsAdditivesRelease agentSpecial CharacteristicsU.V. stabilized or stable to weather, Heat stabilized or stable to heatFeaturesLow OdorApplicationsAutomotive, Electrical and ElectronicalRegional AvailabilityEuropeDisclaimerCopyright M-Base .