Ultramid® B3GM35 Q611|PA6-(GF+MD)40|BASF物性表报告及物性特性介绍,Ultramid® B3GM35 Q611|PA6-(GF+MD)40|BASF注塑参数详情-塑料物性表查询网

Product Texts--- ONLY IN THE USA AVAILABLE ---[table]
流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	25 / *	cm³/10min	ISO 1133
温度(Temperature)	275 / *	°C	ISO 1133
负载(Load)	5 / *	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	8000 / 5000	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	120 / 65	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	3 / 12	%	ISO 527-1/-2
Tensile creep modulus (1h)	* / 2800	MPa	ISO 899-1
Tensile creep modulus (1000h)	* / 1850	MPa	ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)	50 / -	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	50 / -	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	8 / -	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	6 / -	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	220 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	200 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	215 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	38 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6 / *	mm	IEC 60695-11-10

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (1MHz)	3.9 / 6.2	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	200 / 200	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	200 / 200	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E10	Ohm	IEC 60093
相比漏电起痕指数(Comparative tracking index)	- / 400	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	5.7 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	1.7 / *	%	Sim. to ISO 62
密度(Density)	1480 / -	kg/m³	ISO 1183

材料特殊性能(Material specific properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	130 / *	cm³/g	ISO 307, 1157, 1628

CharacteristicsRegional AvailabilityNorth AmericaOther text informationInjection moldingMax. Water content: 0.10% If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 degC (176 degF) is recommended. Drying time is dependent on moisture level, but 2-4 hours is generally sufficient. Alternatively, please contact your BASF representative. Packing pressure affects the final It should be applied and maintained until the gate area is completely frozen off. Minimal back pressure should be utilized toSurface appearance is directly affected byChemical Media Resistance

Acids

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)