Ultramid® B3GM35 Q643|PA6-(GF+MD)40|BASF物性表报告及物性特性介绍,Ultramid® B3GM35 Q643|PA6-(GF+MD)40|BASF注塑参数详情-塑料物性表查询网

Product Texts--- ONLY IN THE USA AVAILABLE ---[table]
机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	7960 / *	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	123 / -	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	2.7 / -	%	ISO 527-1/-2
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	4.1 / -	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	220 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	119 / *	°C	ISO 75-1/-2

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	5.7 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	1.7 / *	%	Sim. to ISO 62
密度(Density)	1480 / -	kg/m³	ISO 1183

CharacteristicsRegional AvailabilityNorth AmericaOther text informationInjection moldingMax. Water content: 0.10% If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 degC (176 degF) is recommended. Drying time is dependent on moisture level, but 2-4 hours is generally sufficient. Alternatively, please contact your BASF representative. Packing pressure affects the final It should be applied and maintained until the gate area is completely frozen off. Minimal back pressure should be utilized toSurface appearance is directly affected byChemical Media Resistance

Acids

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)