Zytel庐 ST811HS NC010|PA6-I|DuPont

Zytel庐 ST811HS NC010|PA6-I|DuPont 物性表: Zytel庐 ST811HS NC010|PA6-I|DuPont物性表及特性介绍,Zytel庐 ST811HS NC010|PA6-I|DuPont注塑参数详情,如需Zytel庐 ST811HS NC010|PA6-I|DuPont下载, 可到相关下载区下载

加工/物理特性值(Value)单位(Unit)测试标准(Test Standard)
ASTM鏁版嵁(ASTM Data)
瀵嗗害(Density) (73掳F)1040kg/m鲁ASTM D 792
鍚告按鐜?Water Absorption) (24hr)1.5%ASTM D 570
娴佸彉鎬ц兘(Rheological properties)dry / cond单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鎴愬瀷鏀剁缉(Molding shrinkage) (parallel)1.8 / *%ISO 294-4, 2577
鎴愬瀷鏀剁缉(Molding shrinkage) (normal)1.8 / *%ISO 294-4, 2577
鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))dry / cond单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鎷変几妯¢噺(Tensile Modulus)900 / 400MPaISO 527-1/-2
灞堟湇搴斿姏(Yield stress)31 / -MPaISO 527-1/-2
灞堟湇搴斿彉(Yield strain)25 / -%ISO 527-1/-2
鏂鎷変几搴斿彉(Nominal strain at break)>50 / -%ISO 527-1/-2
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (+23掳C)N / NkJ/m虏ISO 179/1eU
绠€鏀鍐插嚮寮哄害(Charpy impact strength) (-30掳C)N / NkJ/m虏ISO 179/1eU
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (+23掳C)70 / 130kJ/m虏ISO 179/1eA
绠€鏀缂哄彛鍐插嚮寮哄害(Charpy notched impact strength) (-30掳C)14 / 13kJ/m虏ISO 179/1eA
Puncture energy (+23掳C)16 / -JISO 6603-2
Puncture energy (-30掳C)25 / -JISO 6603-2
ASTM鏁版嵁(ASTM Data)
鎶楁媺寮哄害(Tensile Strength)48MPaASTM D 638
鏂浼搁暱鐜?Elongation at Break)225%ASTM D 638
寮洸寮规€фā閲?寮洸寮规€фā閲?Flexural Modulus))524MPaASTM D 790
Shore D Hardness70-ASTM D 2240
鎮噦姊佸紡鍐插嚮鍒囧彛 (1/8 in)NkJ/mASTM D 256
鎮噦姊佸紡鍐插嚮鍒囧彛 (Low-娓╁害(Temperature))0.693kJ/mASTM D 256
娓╁害(Temperature)-40掳CASTM D 256
鐑€ц兘(鐑€ц兘(Thermal properties))dry / cond单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鐔斿寲娓╁害(鐔斿寲娓╁害(Melting temperature)) (10掳C/min)218 / *掳CISO 11357-1/-3
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (1.80 MPa)47 / *掳CISO 75-1/-2
娓╁害璐熻嵎鍙樺舰(Temp. of deflection under load) (0.45 MPa)170 / *掳CISO 75-1/-2
Vicat softening temperature (50掳C/h 50N)95 / *掳CISO 306
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (parallel)200 / *E-6/KISO 11359-1/-2
COEFF绾挎€х儹(Coeff. of linear therm. expansion) (normal)180 / *E-6/KISO 11359-1/-2
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at 1.5 mm nom. thickn.HB / *classIEC 60695-11-10
鍘氬害娴嬭瘯(Thickness tested)1.5 / *mmIEC 60695-11-10
UL 璇嗗埆(recognition)UL / *--
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at thickness hHB / *classIEC 60695-11-10
鍘氬害娴嬭瘯(Thickness tested)0.8 / *mmIEC 60695-11-10
UL 璇嗗埆(recognition)UL / *--
ASTM鏁版嵁(ASTM Data)
UL 94 闃荤噧绛夌骇(Flame rating)HB-UL 94
鍘氬害娴嬭瘯(Thickness tested)1.5mm-
鐑啫鑳€绯绘暟(Coefficient of Thermal Expansion) (MD)200E-6/KASTM D 696
鐑啫鑳€绯绘暟(Coefficient of Thermal Expansion) (TD)180E-6/KASTM D 696
DTUL @ 66 psi170掳CASTM D 648
DTUL @ 264 psi52掳CASTM D 648
鐔斿寲娓╁害(Melting 娓╁害(Temperature))216掳CASTM D 3418
鐢垫皵鎬ц兘(Electrical properties)dry / cond单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鑰楁暎鍥犳暟(鑰楁暎鍥犳暟(Dissipation factor)) (100Hz)80 / 550E-4IEC 60250
鑰楁暎鍥犳暟(鑰楁暎鍥犳暟(Dissipation factor)) (1MHz)140 / 1800E-4IEC 60250
浣撶Н鐢甸樆鐜?Volume resistivity)1E13 / 1E11Ohm*mIEC 60093
琛ㄩ潰鐢甸樆鐜?Surface resistivity)* / 1E15OhmIEC 60093
鐢垫皵寮哄害(Electric strength)31 / -kV/mmIEC 60243-1
鐩告瘮婕忕數璧风棔鎸囨暟(Comparative tracking index)600 / --IEC 60112
鍏朵粬灞炴€?Other properties)dry / cond单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鍚告按鐜?Water absorption)6.8 / *%Sim. to ISO 62
鍚告箍鎬?Humidity absorption)2.3 / *%Sim. to ISO 62
瀵嗗害(Density)1040 / -kg/m鲁ISO 1183
Film Propertiesdry / cond单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
Strain at yield (parallel)4 / *%ISO 527-3
鏉愭枡鐗规畩鎬ц兘(Material specific properties)dry / cond单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
绮樻暟(Viscosity number)200 / *cm鲁/gISO 307, 1157, 1628
娴佸彉璁$畻灞炴€?Rheological calculation properties)值(Value)单位(Unit)测试标准(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
瀵嗗害(Density) of melt880kg/m鲁-
鐔斾綋鐑鐜?Thermal conductivity of melt)0.15W/(m K)-
瑙勬牸鐨勭儹瀹硅瀺鍖?Spec. heat capacity of melt)2600J/(kg K)-
鍠峰皠娓╁害(Ejection temperature)145掳C-
Diagrams ISO 1817 Liquid C) (23掳C)
ISO 1817 Liquid 4) (23掳C)
ISO 1817 Liquid F) (23掳C)
ISO 1817 Liquid F) (90掳C)
ISO 1817 Liquid F) (>90掳C)
Salt solutions
4 Brake fluid (130掳C)
.

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-95058.html

免责声明: 本文 Zytel庐 ST811HS NC010|PA6-I|DuPont 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4